yl7703永利(中国)有限公司官网-BinG百科NO.1

　　Name:Wei Chen

　　Ph. D, Professor, Ph. D supervisor

　　Address: Room 408 (III), Mechanical Engineering Building

　　Phone: (86) 13952866458

　　Fax:/

　　E-mail:chen_wei@ujs.edu.cn

Education

1997-2001 Ph. D, School of Mechanical Engineering, Shanghai Jiaotong University, China
1991-1994 Master, School of Mechanical Engineering, Jiangsu University, China
1984-1988 Bachelor, School of Mechanical Engineering, Hefei Polytechnic University, China

Professional Experience

2020-Present Professor, Director of Sheet Metal Forming Technology Institute, Mechanical Engineering School, Jiangsu University, China
2005-2020 Professor, Director of Sheet Metal Forming Technology Institute, Vice Dean of Mechanical Engineering School, Jiangsu University, China
2005-2006 Visiting Research Scholar, Mechanical Engineering Department, The University of Michigan, USA
2000-2005 Associate Professor, Director of Sheet Metal Forming Technology Institute, Mechanical Engineering School, Jiangsu University, China
2004-2004 Research Associate, Department of Automation & Computer-Aided Engineering, The Chinese University of Hong Kong, China
2001-2003 Postdoctoral Fellow, Nanjing Automobile Group Corporation, China

Social Academic Post

1. Senior Member of Chinese Mechanical Engineering Society
2. Member of China Die & Mould Industry Association
3. Member of China Plastic Engineering Association
4. Executive Director of Jiangsu Die & Mould Industry Association
5. "Blue Project" Academic Leaders of Jiangsu Province

Research Interests

1. Advanced Forming Technology of Sheet Metal. Hot forming of ultra-high strength steel plate, springback control of multi-step stamping, forming of tailor-welded blanks with curve welding seam, are the hot issue in recent years. The microstructure evolution, the constitutive model deduced from damage theory, the FLD grounded on M-K theory will be studied. The forming quality of complex autobody panels can be predicted and controlled. Finally the key parts of car lightweight are formed precisely.

2. Precise Forming & Micro Forming. High speed forming technology in mesoscale is very important in manufacturing micro parts and products. The high speed forming mechanism and method based on microstructure and friction effect should be researched by means of theoretical analysis, physical testing and numerical simulation. In the project, the special scale effect in mesoscale will be researched during ultrathin sheet metal forming.

3. Digital Manufacture of Mechanical and Electrical Product. CAD, CAE and CAM are integrated together to constitute the digital manufacture system of mechanical and electrical product. In the die digital manufacture system, the geometric model of the deck lid is the most basic core data of the product, and is the most primitive basis for the design, analysis and manufacture of the die. Through CAD, CAE and CAM, a large number of database stored and transmitted directly to the various aspects of the production process, so as to realize the integration of design and manufacture.

Teaching Courses

1. Theory and Mechanics of Sheet Metal Forming (for Doctor Candidate)
2. Precision Forming Process and Die Technology (for Master Candidate)
3. Numerical Virtual Development of Mechanical and Electrical Product (for Master Candidate)
4. Processes of Mechanical Manufacturing (Undergraduate course)
5. Design of Sheet Metal Forming Processes & Die Structure (Undergraduate course)

Honours and Awards

1. “New Forming Technology and Equipment of Body Panels”, The Second-class Award of the Science and Technology Progress of China Machinery Industry, 2007
2. “Research and Application of Advanced Forming Technology in Manufacturing Complex Body Panels”, The Second-class Award of the Science and Technology Progress of Jiangsu Province, 2006
3. “Research and Application of Ultrafine Organization Control Technology for Vanadium Micro-alloyed Steel”, The Second-class Award of the Science and Technology Progress of China Machinery Industry, 2009
4. Invention Patent “Controlling Methods of Weld-beam Movement for Laser Tailor Welded Blank during forming”, The 4th Jiangsu Province Award for outstanding patents, 2005

Main Research Projects

1. “Study on laser cladding and wear control of hot stamping dieface with alternating asymmetrical temperature field”, National Natural Science Foundation of China (No. 51875263), RMB 696,000, 2019 Jan.-2022 Dec., Supervisor
2. “Research and development of ultra high strength steel hot stamping die with dieface temperature control, laser cladding and wear control”, Key research & development plan of Jiangsu Province (No. BE2019025), RMB 1,200,000, 2019 Jun.-2022 Jul., Supervisor
3. “Innovational hot stamping technology for complex ultra high strength body parts and its precise die development”, Science and Technology Program of Jiangsu Province, China (No. BE2014056), RMB 800,000, 2014 Jun.-2017 Jun., Supervisor
4. “Mechanism and method of meso scale high speed forming based on friction effect”, the Specialized Research Fund for the Doctoral Program of Higher Education of China (No. 20133227110013), RMB 120,000, 2014 Jan.-2016 Dec., Supervisor
5. “Research on Forming of Dual-phase Steels Tailor-welded Blanks Based on Microstructure and Temperature”, National Natural Science Foundation of China (No. 50775102), RMB 320,000, 2008 Jan.-2010 Dec., Supervisor
6. “Research on the formability of laser non-linear welding multi-gauge high strength steel”, National Natural Science Foundation of China (No. 50475125), RMB 250,000, 2005 Jan.-2006 Dec., Supervisor
7. “Theoretical and experimental investigation of forming limit stress diagram in relation to multi-stage sheet metal forming analysis”, National Natural Science Foundation of China (No. 50275075), RMB 220,000, 2003 Jan.-2005 Dec., Participator
8. “Half-die / Non-die Precise Forming Process and Equipment of Sheet Metal at High Strain Rate Shock Wave”, China’s CIMS topic of 863 item ( No. 2002AA421120 ), RMB 500,00, 2002 Sep.-2004 Aug., Participator
9. “Key research on the innovation-oriented virtual product development system”, China’s CIMS topic of 863 item, RMB 750,000, 1996 Jun.-2000 Nov., Participator
10. “Research on formability analysis of Laser tailor-welded blanks”, Postdoctoral Science Foundation of China ([2001] No. 14 ), RMB 10,000, 2001 Jun.-2003 Dec., Supervisor
11. “Research on Controlling Weld-beam Movement of Laser tailor-welded blanks during Forming”, Natural Science Foundation of Jiangsu Province (BK2002009), RMB 60,000, 2002 Jun.-2005 May., Supervisor
12. “Study on Microstructure Evolution in Warm Forming Process of Laser Tailoe-welded Blanks of High Strength Steel”, the 2006 Qing-lan Project of Jiangsu Provincial Education Department for Academic Leader, RMB 30,000, 2007 Jan.-2009 Dec., Supervisor
13. “Research on Application of Simulation Technology of Sheet Metal Forming for Auto Body Manufacturing”, Natural Science Foundation of Jiangsu Province Education Office (01KJB460003), RMB 30,000, 2002 Jan.-2003 Dec, Supervisor
14. “Study and Industrialization on Key Technology of Hot Forming Precise Complex Part with Ultra-high Strength Steel Tailor-welded Blanks”, Project of Industry / University / Institute Cooperation of Wuxi City, RMB 12,000, 2010.July-2012 Jun., Supervisor
15. “Study on Warm Forming Formability of Dual-phase Tailor-welded Blanks at Strength/stiffness Constraints”, Open Fund of Shanghai Key Laboratory of Digital Autobody Engineering (No. 200903), RMB 30,000, 2010 Jan.-2011 Dec., Participator
16. “Study on Relations between Warm Forming Formability and Microstructures of Dual-phase Tailor-welded Blanks”, Open Fund of Shanghai Key Laboratory of Digital Autobody Engineering (No. 2008003), RMB 20,000, 2009 Jan.-2010 Dec., Participator
17. “Digital Manufacture and Industrialization of Precision High-speed Series Dies Frame”, Project of Industry / University / Institute Cooperation of Zhenjiang City, RMB 150,000, 2009 Jan.-2010 Dec., Supervisor
18. “The Precise Forming and Dynamic Optimization of Critical Parts in Concrete Transportation Machinery”, Project of Industry / University / Institute Cooperation of Zhenjiang, RMB 180,000, 2007 Jan.-2008 Aug., Supervisor
19. “CAD/CAE/CAM Integrated Technology for Numerical Camera”, Project of Industry / University / Institute Cooperation of Zhenjiang City , RMB 80,000, 2003 Jan.-2003 Dec., Supervisor
20. “Research on CAD/CAE/CAM Integrated Technology for Auto Panels Dies”, Jiangsu University, RMB 30,000, 2002 Jan.-2003 Oct., Supervisor
21. “Application of Numerical Simulation of Sheet Metal Forming in the Auto Body Manufacturing”, Yuejin Auto Group Corp., RMB 440,000, 2001 Jun.-2003 Dec., Supervisor
22. “The Application of AutoForm in the Auto Body Virtual Manufacturing”, Technology Center of Yuejin Auto Group, RMB 100,000, 2001 Jun.-2003 Dec., Supervisor
23. “CAD/CAE/CAM Integrated System for Auto Body Manufacturing”, Auto Body factory of Truck Corp. of Yuejin Auto Group, RMB 40,000, 2001 Apr.-2003 Dec., Supervisor
24. “CAD/CAE/CAM Integrated Development for Numerical Camera”, Zhenjiang Jiangkui Group Corp., RMB 30,000, 2002 Apr.-2004 May., Supervisor
25. “The Establishment and Application of Quoted Price Prototype System for Panel Die”. Shanghai Jinyong Dies Limited Corporation (No. 2009314), RMB 30,000, 2009 Dec.-2010 May, Supervisor

Main Scientific Publications

1. WeiChen*, Yitao Zhu, Long Chen, Fenghua Chen, Bo Liu. Effects of different process parameters on mechanical properties and microstructures of hot stamping boron steel. The International Journal of Advanced Manufacturing Technology, 2021, 114: 939-948
2. Wei Chen*, Bo Liu, Long Chen, Jiangping Xu and Yingxia Zhu. Effect of laser cladding stellite 6-Cr3C2-WS2 self-lubricating composite coating on wear resistance and microstructure of H13. Metals, 2020, 10, 785
3. Wei Chen*, Long Chen, Ahar Benjamin Term, Yinxia Zhu, Luyou Yue. BHF-window-based research of BHF technology applicability at elevated temperature. International Journal of Advanced Manufaturing Technology, 2017, 93(5-8): 2161-2171
4. Wei Chen*, Peng Peng Tang, Chang Li Cha, Zai Min Jiang, Yang Kang Ou. Research of the closed-loop control system for hydraulic press. International Conference on Sustainable Energy and Environment Protection, 2015-01-01
5. Wei Chen*, Zhifeng Chen, Zhifu Cao, Tao Qi, Xiang Wang, Qing Zhao. Study on the Hot Stamping of Rectangular Box with Ultra-high Strength Steel. Advanced Materials Research Vols. 763 (2013) pp 156-159
6. Wei Chen*, Shan Cheng, Lei Xue, G.uangyu Teng, Mingyan Wu. Modelling of flow stress of dual phase steel under warm tensile deformation. Materials Science and Technology, 2011, 27(6): 1002-1006
7. W. Chen*, G. S. Lin, S. J. Hu. A Comparison Study on the Effectiveness of Stepped Binder and Weld Line Clamping Pins on Formability Improvement for Tailor Welded Blanks. Journal of Materials Processing Technology 207 (2008): 204-210
8. W. Chen*, Z. J. Liu, B. Hou, R. X. Du. Study on Multi-stage Sheet Metal Forming for Automobile Structure-pieces. Journal of Materials Processing Technology 187-188 (2007): 113-117
9. Wei Chen*, Ji-Chang Yang, Zhong-Qin Lin. Application of integrated formability analysis in designing the Die-face of automobile panel drawing dies. Journal of Materials Processing Technology, 121/2-3 (2002): 293-300
10. Wei Chen*, Ji-Chang Yang, Zhong-Qin Lin. Expansion Ratio for Initial Die-Face Design of Panel Drawing Dies. International Journal of Machine Tools and Manufacture 42/10 (2002): 1195-1202
11. W. Chen*, S. Cheng, Y. Ding, Y. Q. Guo, L. Xue. Establishment and Application of Forming Limit Diagram of Multi-gauge Laser Tailor-welded Blanks. Advanced Materials Research Vols. 97-101 (2010) pp 420-425
12. Wei Chen*, Mingyan Wu, Zhongfu Huang, Yi Ding and Fengze Dai. Studies on the Processes Design of Multi-Step Sheet Metal Forming. Advanced Materials Research Vols. 146-147 (2011) pp 1855-1858
13. Wei Chen*, Ke Pan, Mingyan Wu, Zhongfu Huang, Fengze Dai. The investigation of multi-stage sheet metal stamping process for deep drawing. Advanced Materials Research Vols. 189-193 (2011) pp 2675-2679
14. Wei Chen*, Zhigan Pen, Bo Hou, Jianwei Bei, Huayun Feng. Theoretical establishment of forming limit diagram for laser tailor-welded blanks. Journal of Mechanical Engineering, 2009, 45(4): 183-186
15. Wei Chen*, Jichang Yang, Zhongqin Lin. Weld-bead movement and formability of tailor-welded blanks during forming automobile panels. Journal of Mechanical Engineering, 2004, 40 (9): 62-66
16. Wei Chen*, Kanmin Chen, Lei Xue, Hailiang Yu, Yan Cai. Mechanical properties and laser welding process of B170P1 multi-gauge high strength steel. Transactions of the China Welding Institution, 2010, 31 (6): 1-4
17. Wei Chen*, Lei Xue, Kanmin Chen, Shan Cheng, Warm Tensile Properties and Microstructures of Dual Phase Steel Laser Tailor Welded Blanks. Journal of Materials Engineering, 2010, (7): 54-58
18. Wei Chen*, Lei Xue, Shan Cheng, Guangyu Ten, Mingyan Wu. The Flow Stress Model of Dual Phase Steel Laser Tailor Welded Blanks during Warm Tension. Journal of Functional Materials, 2009, 40 (12): 2034-2037
19. Wei Chen*, Weigan Guo, Bo Hou, Jiahua Zhang. Prediction of Forming Limit Diagram in Sheet Metal Forming Based on Thickness Gradient Criterion. Chinese Journal of Mechanical Engineering, 2007, 18 (18): 2246-2249
20. Wei Chen*, Yimin Wu, Dun Lu, Bo Hou, Weigan Guo. Research on Formability of Tailor-welded Blanks with Different Thickness in Door Inner Stamping. Chinese Journal of Mechanical Engineering, 2006, 17 (11): 1188-1190
21. Wei Chen*, Jie Shen, Xiaofeng Wu, Hailiang Yu, yan Cai. Research on Welding Microstructure and Tensile Performance of HSA340 High-strength Laser Welding-tailored Blanks. Journal of Plasticity Engineering, 2008, 15 (5): 163-167
22. Wei Chen*, Weiguo Li, Jichang Yang, Jiahua Zhang. Influence of Non-linear Weld Line Arrangement on Laser Tailor-welded Blanks Forming Performances. Transactions of the Chinese Society for Agricultural Machinery, 2008, 39 (9)): 170-173
23. Wei Chen*, Bo Hou, Jianwei Bei, Zhigan Pen, Huayun Feng. Establishment of failure criterion and prediction of forming limit for laser tailor-welded blanks. Journal of Jiangsu University of Science and Technology ( Natural Science ), 2008, 29 (4): 80-83

Patents

1. Wei Chen, Ji-chang Yang, Zhi-gang Zhong. Controlling Methods of Weld-beam Movement for Laser Tailor Welded Blank during forming. Invention Patent, 2002 Oct., No. 02138454.1 (Authorized by China Patent Bureau, Aug. 18, 2004)
2. Wei Chen, Ji-chang Yang, Zhi-gang Zhong, Yin-fang Jiang. Single Action Hydraulic Experimental Tool for Sheet Metal Forming with Abilities of Varying Blank-hold Force and Stamping Velocity. Invention Patent, 2003 Mar., No. 203112933.1 (Authorized by China Patent Bureau, Aug. 16, 2004)
3. Wei Chen, Jie Sheng, Yu-cheng Lei, Qiang Zhu, Wei-gang Guo. The Flexible Welding Fxture for Straight and Curvilinear Welded Lines of Tailor Welded Blanks. Invention Patent, 2007 Mar., No.200710020495.4 (Authorized by China Patent Bureau, May 20, 2009)
4. Wei Chen, Wei-guo Li, Xin-cheng Li, Dun Lv, Lu-you Yue. The Curvilinear Welded Lines Arrangement and Forming of Multi-gauge High Strength Steel Laser Tailor-welded Blanks. Invention Patent, 2007 Nov., No. 200710190545.3 (Authorized by China Patent Bureau, July 01, 2009)
5. Wei Chen, Bo Hou, Dun Lv, Lu-you Yue, Jian-wei Bei, Xin-cheng Li. FLD Establishment and Application of Multi-gauge Laser Tailor-welded Blanks. Invention Patent, 2008 Feb., No. 200810020646.0 (Authorized by China Patent Bureau, June 23, 2010)
6. Wei Chen, Hong-hui Chen, Jun Xie, Lu-you Yue, Dun Lv, Feng-ze Dai. The concrete mixing blade dieface design system and method based on springback compensation. Invention Patent, 2008 Aug., No.200810021147.3 (Authorized by China Patent Bureau, June 6, 2010)
7. Wei Chen, Bo Hou, Dun Lv, Jian-wei Bei, Lu-you Yue, Shan Cheng. The Device and Method to Obtain Plane Ultimate Strain of Multi-gauge Laser Tailor-welded Blanks.. Invention Patent, 2008 May, No.200810021147.3 (Authorized by China Patent Bureau, April 1, 2011)
8. Wei Chen, Guang-yu Teng, Yi Ding. Yu-qin Guo, Kang-min Chen. A Warm Uniaxial Tensile Fixture for Metal Sheet Forming. Invention Patent, 2009 July, No.200910181234.X(Authorized by China Patent Bureau, May 19, 2011)

Plan for Overseas Master & Ph. D

One Master, One Ph. D